Product Description
5 micron Inline Post Filter, (Post-Distillation), 6” x 2” FPT Filter. For any of our Automatic Models: H2oMatic, Precision Water, Pure Water, Durastill, and most other automatic water distillation systems.
NO TOOLS REQUIRED 5 micron Inline Post Filter, (Post-Distillation), 6” x 2” FPT Filter. Now with built-in quick-connect fittings that make filter changes faster and easier than ever. No wrenches, no adapters, no hassle. Just push the line in and you're done.
For any of our Automatic Models: H2oMatic, Precision Water, Pure Water, Durastill, and most other automatic water distillation systems. Will require a reducer from 3/8th hose to 1/4" to accommodate the filter
Distillation gets you most of the way to truly pure water. The K2340-JJ takes you the rest of the way and makes staying on top of maintenance easier than ever.
Installed after distillation, this dual-action filter combines 5-micron sediment reduction with a coconut shell granular activated carbon (GAC) stage to catch anything that makes it past the distillation process residual particulates, trace organics, or anything that could affect the taste or odor of your water. Coconut shell carbon is among the most effective natural filtration media available, and the result is water that's not just analytically pure, but genuinely clean-tasting.
What sets the JJ apart from our standard post-filter is what's built into both ends: 1/4" quick-connect fittings that require no tools, no threading, and no separate hardware. Push your water line in, and the fitting grabs and seals automatically. A reducer will be needed for applications that normally use a 3/8 hose such as Durastill, Precision, H2omatic, and Pure Water distillers (not included). When it's time to replace, every 3 to 6 months, release the line, swap the filter, and you're back up and running in seconds. It's the kind of upgrade that makes the maintenance you know you should be doing actually happen on schedule.
Compatible with the H2oMatic, Precision Water, Pure Water, Durastill, and most other automatic water distillation systems with 1/4" water lines. Pairs perfectly with the K2305-JJ quick-connect pre-filter for complete, tool-free end-to-end filtration. A reducer will be needed for applications that normally use a 3/8 hose such as Durastill, Precision, H2omatic, and Pure Water distillers (not included).
Recommended Service Interval: Every 3 months, with a maximum service life of 6 months. Actual replacement frequency will vary based on water usage and source water quality.
Features:
- Sediment Reduction: 5 microns.
- Coconut Shell Granular Activated Carbon Filter 12 x 40 Mesh
- Service Flow Rate: 0.50 GPM (1.9 LPM).
- Maximum Pressure: 125 PSIG.
- Temperature: 35-100° F (2-38° C).
- Polypropylene depth filtration.
- Product Certification Standard: NSF/ANSI 42
